Features in 86231-05 – Allied Telesis AR800 Series User Manual
Page 24

24
Patch Release Note
Patch 86231-10 for Software Release 2.3.1
C613-10328-00 REV J
.
If PIM DM was configured with multicast switch emulation, and OSPF was
configured and the switch was restarted during the processing of multicast
packets, PIM DM was updated with the correct route information, however,
the MARL table was updated with incorrect information. This caused
packets to be forwarded by software instead of being switched by
hardware, or dropped. This issue has been resolved.
The IP Filter SIZE parameter was not being applied correctly. This issue has
been resolved.
The SET IP FILTER command would not update the SIZE parameter
correctly. This issue has been resolved.
If the IGMP query interval was set to less than 4 seconds, then IGMP query
messages were not sent. This issue has been resolved.
An issue with multicast code which is used for copying multicast packets
has been resolved.
Equal cost multipath routing sometimes failed to use equal cost routes in
balance. This issue has been resolved.
Features in 86231-05
Patch file details are listed in Table 6.
Patch 86231-05 includes all issues resolved and enhancements released in
previous patches for Software Release 2.3.1, and the following enhancements:
The firewall TCP timeout values for sessions in the CLOSED and
TIMEWAIT states have been reduced. This only applies to the stateful
inspection of firewall sessions and not to the TCP module.
PCR 02160
Module: PIM
Network affecting: No
PCR 02161
Module: IPG
Network affecting: No
PCR 02162
Module: IPG
Network affecting: No
PCR 02165
Module: IPG
Network affecting: No
PCR 02169
Module: IPG
Network affecting: No
PCR 02175
Module: IPG
Network affecting: No
Table 6: Patch file details for Patch 86231-05.
Base Software Release File
86s-231.rez
Patch Release Date
11-Apr-2002
Compressed Patch File Name
86231-05.paz
Compressed Patch File Size
140084 bytes
PCR: 01263
Module: FIREWALL
Network affecting: No