Allied Telesis AR800 Series - Manual (Page 29)

Patch 86231-10 For Rapier Switches and AR800 Series Modular Switching Routers 29
Patch 86231-10 for Software Release 2.3.1
C613-10328-00 REV J
Features in 86231-04
Patch file details are listed in Table 7:
Patch 86231-04 includes all issues resolved and enhancements released in
previous patches for Software Release 2.3.1, and the following enhancements:
When telnetting to the switch, the TCP connection was reset, and when the
packet was passed to IPG_Forward a fatal error occurred. This patch
implements a workaround.
An addition to the patch resolves issues with IGMP reflooding query
packets to tagged ports.
Features in 86231-03
Patch file details are listed in Table 8:
Patch 86231-03 includes all issues resolved and enhancements released in
previous patches for Software Release 2.3.1, and the following enhancements:
In situations where a switch port has been forced to half duplex mode and
the link partner is forced to full duplex mode it is possible for the switch to
enter a state where it is unable to transmit packets. This patch prevents this
state from being reached despite the misconfiguration.
If a layer 3 hardware filter for a particular packet type (e.g. Netbeui) was
configured, all IP packets destined for the CPU were discarded. This issue
has been resolved.
Table 7: Patch file details for Patch 86231-04.
Base Software Release File 86s-231.rez
Patch Release Date 27-Feb-2002
Compressed Patch File Name 86231-04.paz
Compressed Patch File Size 58456 bytes
PCR: 02005 Module: IPG Network affecting: No
PCR: 02056 Module: IGMP Network affecting: No
Table 8: Patch file details for Patch 86231-03.
Base Software Release File 86s-231.rez
Patch Release Date 21-Feb-2002
Compressed Patch File Name 86231-03.paz
Compressed Patch File Size 57516 bytes
PCR: 01288 Module: SWI Network affecting: No
PCR: 02019 Module: SWI Network affecting: No