ididit Retrofit Steering Column: 1970-75 Camaro User Manual
Page 8

If you have purchased this column as a Keyless Ignition
Column please refer to the Touch-N-Go Start keyless
ignition Instructions.
Electrical
(cont.):
Ignition Switch Testing:
1. Verify the vehicle is in park or out of gear if manual transmission.
Insert your key in the ignition and turnkey counter clockwise to the
Accessory position. Radio, blower motor and dome lights should
function.
2. Rotate key clockwise two positions. All accessories should have
power and the ignition system should be on. (Coil or electronic
ignition has power)
3. Rotate key clockwise one more position and the vehicle should
crank and start. If the vehicle does not crank check the neutral
safety switch and verify its function.
If all the functions are correct secure 4 wire ignition connector
tightly.
Simple reference of electrical system:
Red wire
Power (in)
Brown wire
Accessory feed (out)
Pink wire
Ignition feed (out)
Purple wire
Starter signal (out)
Note: The Purple wire is interrupted with a Neutral Safety
Switch.
This car originally had a Neutral Safety Switch
on the column. Our column does not include one. ididit
recommends a neutral safety switch for all automatic
transmissions. If your floor shifter does not have one
built in, aftermarket transmission mounted switches
are available.
6