Extang Express Tonno: Ford Sport Trac 07+ User Manual

Page 2

Extang Corporation, 1901 E. Ellsworth Rd., Ann Arbor, MI 48108, 734 677-0444, Fax: 734 677-8409, Visit us at:

www.extang.com

Insert tail rail into the
tailgate block and rotate
it down to the spring
lever. Tarp is self-
tensioning.

EASY USE OF TRUCK BED
Tarp may be rolled up and secured with buckle
straps for bulk hauling. For more access, tarp can
also be removed completely by loosening knurled
knobs, retracting slide blocks and pulling the forward
catch lever down.

Seal the tonno by pressing

the velcro© fastening strips from

the cab end and press all the

way back, pulling tarp

outward as you go.

Before using any commercial car wash, push down

both sides of the Velcro© strips. This will reduce the

possibility of water entering the truck bed.

Over time, the velcro might develop a fuzzy appearance.

This is normal and will increase the holding strength.

For care instructions see tag on underside of tarp

To release tarp, push down

on spring lever.

Bows can be

detached from the

underside of the Tarp.

Insert Sport Trac

clamps into the

side rail.

Tighten bolts with Allen

wrench provided.

Repeat steps 3 and 4

for the other rail.

Engage the narrow edge of the cab rail to the

pivot blocks and rotate the rail down while pulling

the cabrail back against the pivot block.

IMPORTANT: If tarp touches cab of truck, move

side rails back.

Slide the slide blocks outward

so that they engage the wide flange of the side

rail and secure the knurled knobs to tighten.

Unroll your tarp from the cab rail to the

tailgate. The tonno bows are deployed as

the tarp is unrolled.

Reinsert sidewall

bolts to hold rail

in place.

If needed, you can adjust the

alignment of the tailgate rail by

changing the tailgate strap positions.

Place tonno assembly in the cab

end of truck bed.

Prior to driving vehicle make sure both

slide locks at cab rail are secure.

Loosely attach

Sport Trac

clamps with

Clamp Bolts