Extang Platinum BlackMax: Ford Sport Trac - Manual

PARTS INCLUDED IN YOUR KIT. You may want to lay them out in this manner for accessibility.
MISSING PARTS???
call Extang at 1-800-877-2588
Any and all needed parts will be shipped to you
directly. (DO NOT return whole kit to store)
Extang Corporation
1901 E. Ellsworth Rd.
Ann Arbor, MI 48108
734 677-0444, Fax: 734 677-8409
Register your warranty at:
www.extang.com
I t e m N o . 0 0 2 5 - 0 7 0 8 R H P r i n t e d i n U . S . A .
INSTALLATION SHEET
-Explorer Spor t Trac
3
Remove paper tape from all rails. Discard properly.
Foam has NO adhesive to
touch truck finish.
Wash truck bed.
P L E A S E
D O N O T
L I T T E R
Pull back on the ClickLock TM
release and remove one corner
from cab rail.
Feed tarp dowel into cab rail.
(NOTE: For easiest feeding action, place tarp on a flat
smooth surface, and keep dowel straight while feeding
into cab rail. Caution, pavement may scuff tarp.)
Reinsert corner piece into cab
rail until it “clicks” and locks
into place.
ClickLock TM
1 2
Clamp Bolts
Tarp
Bows
Corner Pieces
For Classic Platinum Only (This step does not apply to BlackMax)
Cab Rail
(BlackMax includes snaps on this rail)
Tailgate Rail
Side Rails
Long Neck
Side Rail Clamps
(x2)
Short Neck
Side Rail Clamps
(x2)
Sport Trac
Brackets (x4)
NOTE:
B LACK M AX has snaps
on all rails.
4
Place assembly
over truck box. Center
between cab and tailgate.
Off the truck bed,
connect the end rails to
the two side rails.
Metric
Wrench
(5 mm)
Replacement
Metric Screws (x4)
Allen Wrench
(3/16")