EOTech CNVD-T (SU-232/PAS) Clip-On Night Vision Device - Thermal - Manual (Page 35)

2-19
NOTE
When viewing the CNVD-T thermal image on an
external monitor, the RS170 video format must be
selected. Using the VGA video format for this
purpose will result in an extremely distorted image.
2.12.7 Exit (EXIT) . Exiting the Main Menu is accomplished
by either activating the EXIT menu item or pressing the
LEFT or RIGHT button. Exiting the Main Menu saves all
changes made and returns the CNVD-T to normal viewing
mode.
NOTE
The message “NO SAVE” will appear at the
bottom of the display if settings could not be saved
due to low battery power. Changes will be made,
but not saved for future use.
Figure 2-16 Menu - Exit
Or to exit any
time:
or
ZOOM 1X
POL
CAL
RETINT
RET
RS170
EXIT