EOTech CNVD-T (SU-232/PAS) Clip-On Night Vision Device - Thermal - Manual (Page 29)

2-13
Menu items are then selected (underlined) by scrolling with
the UP / DOWN buttons. Where available, sub-menus are
accessed by pressing the LEFT / RIGHT buttons. Activation
of the selected menu item is accomplished by again pressing
the MENU / ZOOM button. If there is no button activity
within approximately 10 seconds, the Main Menu will
disappear and the CNVD-T will revert to normal viewing
mode. Once activated, menu options will remain at that
setting (even if the CNVD-T is turned off) until reset by the
operator.
2.12.1 ZOOM 1X / ZOOM 2X . Activating the ZOOM 1X /
ZOOM 2X menu item toggles between a 1x and 2x
magnified viewed image. Toggling between ZOOM 1X and
ZOOM 2X may also be accomplished when the Main Menu
is NOT displayed by double-tapping the MENU / ZOOM
button. When in ZOOM 2X mode, the word “ZOOM” will
appear near the bottom of the display and blink once every 5
seconds.
WARNING ..
Activating ZOOM 2X when the CNVD-T is used in-
line with other optical sights may induce an error in
the aiming function of those devices.
Figure 2-8 Menu – ZOOM 1X / ZOOM 2X
ZOOM 1X
POL
CAL
RETINT
RET
RS170
EXIT