Clinton Electronics CE-M8SD-B - Manual (Page 9)

9
Change SD-Card Image/Video/Audio
• Insert the SD-Card into your computer or SD-Card reader.
• Move the desired JPEG image, or AVI video file into the SD-Card folder.
(For the M8SD-B the desired full screen image size is 800x600)
• Leaving multiple media files on the SD-Card will result in the device cycling through all loaded media.
• Insert the SD-Card back into the PVM with the contacts facing out, as shown on the right-
DO NOT FORCE IT IN.
*NOTE: If you wish to not display SD-Card content, you must set “Alarm Camera Dwell” to “On”,
and “Detect” to “Alarm”
WHEN SD CARD IS INSERTED,
YOU MUST POWER CYCLE.
You can do this by pushing the POWER
button on the long remote,
or by unplugging the power cord from the wall.
SD Card
16
GB
SD Card
2
GB