Clinton Electronics CE-M8SD-B - Manual (Page 14)

14
Motion setup
SET MD AREA
The motion detection area is split up into 16 x 12 cells. Cells which are marked to detect motion are
displayed red.
In order to navigate use buttons and confirm by pressing button. Press play-
back button in order to change the editing mode.
Editing modes:
SET MD SENSITIVITY
Here you can set the sensitivity of motion detection.
REC
MENU
Exit OSD
DVR AV
REC
MENU
Exit OSD
DVR AV
REC
MENU
Exit OSD
DVR AV
REC
MENU
Exit OSD
DVR AV
REC
MENU
Exit OSD
DVR AV
REC
MENU
Exit OSD
DVR AV
CELL EDIT Here you can (de-) activate every single cell.
DEL BLOCK Here you can deactivate a complete block of cells.
DEL ALL
Here you can deactivate all cells at once.
ADD BLOCK Here you can activate a complete block of cells.
ADD ALL
Here you can activate all cells at once.
MD ENERGY Shows the current recognized motion.
MD THRESHOLD
By pressing the buttons or you can set the value when
motion detection is triggered. The lower the value is set the more
sensitive motion detection reacts. More bars = More sensitive
REC
MENU
Exit OSD
DVR AV
REC
MENU
Exit OSD
DVR AV