BMR Suspension TCK005 User Manual
Page 2
TRANSMISSION CONVERSION CROSSMEMBER
TCC005 – 1967-1969 F-BODY
CONTINUED
6. Install the crossmember and bolt it to the transmission mount using the provided 7/16” mounting bolt. Leave
the bolt slightly loose to allow for final adjustment. (IMAGE 6)
7. Using the provided 5/16” x 1” bolts, mount the crossmember to the previously installed frame mounts. Use
the provided SAE washers on the slotted side of the connection. Once all 8 bolts are installed, tighten both
sides as shown in IMAGE 7.
8. Adjust the entire assembly left to right to center the transmission in the tunnel then tighten the outer
mounting bolts at the subframe using (2) ½” wrenches. (IMAGE 8)
9. Tighten the center transmission mounting bolt using a 5/8” socket.
WWW.BMRSUSPENSION.COM
This product is an aftermarket accessory and not designed by the vehicles manufacturer for use on this vehicle. As such, buyer assumes all risk of
any damage caused to vehicle/person during installation or use of this product.