BMR Suspension BCP001 User Manual
Page 2
BRAKE CONVERSION PACKAGE – BCP001 (CONTINUED)
9. Using a 32mm socket with an impact gun, remove the large CV nut in the center of the hub. (IMAGE 6)
10. Remove the outer Toe Rod bolt at the spindle using a 21mm socket. (IMAGE 7)
11. Using an 18mm socket and 18mm wrench, un-bolt the outer Trailing Arm bolt. (IMAGE 8)
12. Remove the Lower Control Arm bolt using an 18mm wrench and socket.
13. Remove the Upper Control Arm bolt using an 18mm wrench and socket. (IMAGE 9)
14. With the spindle sitting on a work bench, use a 13mm socket to remove the three bolts for the hub as shown in
IMAGE 10 below.
15. Re-assemble the hub onto the new BMR spindle using the OE bolts. Torque to 85 ft/lbs.
16. Attach the BMR aluminum brake bracket as shown using the supplied 3/8” x 1.5” Allen bolts, washers and nuts.
Use a 5/16” Allen wrench (or socket) and a 9/16” wrench to tighten the bolts. (IMAGE 11)
17. Install the BMR spindle and tighten the CV nut.
PAGE 2