Brewer AssistPRO - Manual (Page 15)

Document # 101522 0608 REV A ER 784 15
CAUTION
To prevent damage to the unit, the legrest must be
returned to the shortest position prior to lowering
the legrest to the vertical position.
Figure 19. Legrest Kneeling Position
Legrest Kneeling Position (Figure 19)
The legrest can be rotated to a kneeling position.
1. Grasp the legrest cushion on both sides.
2. Rotate the cushion upward until rotation stops.
3. Slide the legrest downward and rotate the cushion
downward to engage the stop. Two height positions
are provided.
TABLE ADJUSTMENTS (CONTINUED)
Cam positioned in slot
Lift up over-center
NOTE: Make sure the legrest cushion is full engaged with
the stops on both sides. When properly engaged, the
legrest cushion is parallel to the ground.
1 2 3
Legrest Extension (Figure 18)
In the horizontal position, the legrest can be extended 5”
to increase the overall length of the table.
Lift up on the legrest and pull outward to extend the
legrest. To return the legrest to the shortest position, lift
up on the legrest and push fully inward.
Figure 18. Legrest Extension