ADTRAN ATLAS 800PLUS - Manual (Page 73)

Chapter 5. Using the Terminal Menu
61200226L1-1 ATLAS _ 800 PLUS User Manual 5-21
TFTP Server IP Address
Write security: 3; Read security: 5
Specifies the IP address of the TFTP server. Get this number from your system
administrator.
TFTP Server Filename
Write security: 3; Read security: 5
Defines the name of the configuration file that you will transfer to or retrieve
from the server. The default name is
atlas.cfg , but you can edit this name.
Current Transfer Status
Read security: 5
Indicates the current status of the update.
Previous Transfer Status
Read security: 5
Indicates the status of the previous update.
Load and Use Config
Write security: 3; Read security: 5
Retrieves the configuration file specified in the
TFTP Server Filename field
from the server.
If you execute this command, the ATLAS _ 800
PLUS
system retrieves the configu-
ration file, reboots, then restarts using the new configuration.
Save Config Remotely
Write security: 3; Read security: 5
Saves the configuration file specified in the TFTP Server Filename field to the
server identified in the TFTP Server IP Address field.
Before using this command, you must have identified a valid TFTP server in the
TFTP Server IP Address field.
System Self-test
Conducts a system self-test. The self-test consists of memory tests and data paths
to each installed module.
Self-tests disrupt data flow.
Self-test Run
Write security: 3; Read security: 5
Activates the self-test.