GE PV970NSS - Manual (Page 7)

49-80549-2
7
Installation
Chimney Vent Hoods
Instructions
BEFORE YOU BEGIN
Read these instructions completely and
carefully.
•
IMPORTANT
³Save these instructions
for local inspector’s use.
•
IMPORTANT
³ Observe all governing
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these instructions
for future reference.
• Skill level – Installation of this vent hood
requires basic mechanical and electrical skills.
• Completion time –
$SSUR[LPDWHO\
1 to 3 hours
• Proper installation is the responsibility of the
installer.
• Product failure due to improper installation is
not covered under the Warranty.
PRODUCT DIMENSIONS
FOR YOUR SAFETY:
WARNING
³ Before beginning the
installation, switch power off at service panel and
lock the service disconnecting means to prevent
power from being switched on accidentally.
When the service disconnecting means cannot
be locked, securely fasten a prominent warning
device, such as a tag, to the service panel.
CAUTION
³ Due to the weight and size
of these vent hoods and to reduce the risk of
personal injury or damage to the product, TWO
PEOPLE ARE REQUIRED FOR PROPER
INSTALLATION.
30” Models Require a 30” Wide Opening
*Height
to
Ceiling
19-µ µ
µ
µ
µ
*Height
to
Ceiling
19-µ µ
µ
µ
µ
36” Models Require a 36” Wide Opening
µ
* For supplied duct cover ceiling heights for vented
installation and recirculating installation, refer to the
table on page 13.
µ
Allow 1”
overlap of
duct.
µ
Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: GEAppliances.com ?