HP SAN - Manual (Page 18)

Figure 8 Select Storage window
.
Adding a storage group
To add a storage group, complete the following steps:
1. Enter a convenient name (optional) of the storage group in the Storage Group box.
2. Enter the number of storage devices in this group in the Storage Count box. The number must be
between 1 and 100.
3. Select the storage model from the Storage Model drop-down list.
If required, select the number of fabric connections for each server in the Fabric Connections for
each Storage Model drop-down list.
4. Click the Add Storage Group button to add this group.
The storage group is listed in the storage group table.
Modifying a storage group
To modify a storage group, complete the following steps:
1. Select a previously added storage group you want to modify. You can select the storage group
in one of the following ways:
• From the Storage Group drop-down list
• From the Storage Group table
2. Modify details of the storage group per your requirements.
3. Click the Add Storage Group button to save changes.
Using SAN Designer 18