HP SAN - Manual (Page 17)

3. Modify details of the server group per your requirements.
4. Click the Add Server Group button to save changes.
Modifying a blade system group
To modify a blade system group, complete the following steps:
1. On the Select Server/Blade window, click the Blade system group tab to view the blade system
group details.
2. Select an added blade system group you want to modify. You can select the blade system group
in one of the following ways:
• From the Blade system group drop-down list
• From the Blade Group table
3. Modify details of the blade system group per your requirements.
4. Click the Add Blade System Group button to save changes.
Deleting a server group
To delete a server group, complete the following steps:
1. On the Select Server/Blade window, click the Server group tab to view the server group details.
2. Select an added server group you want to delete. You can select the server group in one of the
following ways:
• From the Server group drop-down list
• From the Server Group table
3. Click the Delete Server Group button to delete the server group from your SAN.
Deleting a blade system group
To delete a blade system group, complete the following steps:
1. On the Select Server/Blade window, click the Blade system group tab to view the blade system
group details.
2. Select an added blade system group you want to delete. You can select the blade system group
in one of the following ways:
• From the Blade system group drop-down list
• From the Blade Group table
3. Click the Delete Blade System Group button to delete the blade system group from your SAN.
Specifying storage details
The Select Storage window displays the storage details of your SAN. Figure 8 shows the Select
Storage window.
The Select Storage window enables you to add, modify, and delete a storage group.
After entering storage details, click Next to enter fabric details.
HP StorageWorks Essentials SAN Designer 1.5 User Guide 17