HP SAN - Manual (Page 14)

The Select Server/Blade window enables you to add, modify, and delete a server and a blade system
group.
After entering server and blade details, click Next to enter storage details.
Figure 5 Select Server/Blade window
.
Adding a server group
To add a server group, complete the following steps:
1. On the Select Server/Blade window, click the Server group tab. The server group details are
displayed, as shown in
Figure 6 .
2. Enter a convenient name (optional) for the server group in the Server group box.
3. Enter the number of servers in this group in the Server Count box. The number must be between
1 and 100.
4. Select the operating system from the Server OS drop-down list.
5. Select the operating system version for the selected OS from the OS Version drop-down list.
6. Enter the number of HBA fabric connections for each server in the server group in the HBA fabric
connections for each server box. The number must be between 1 and 16.
Using SAN Designer 14