HP ZBook 15 Mobile Workstation - Manual (Page 65)

3. Slide the service cover toward the front of the computer (4), and then lift to remove the service
cover (5).
Replacing the service cover
Replace the service cover after accessing the memory module slot, hard drive, regulatory label, and
other components.
1. Tilt the service cover down to align the front edge of the service cover near the front edge of the
computer (1).
2. Insert the alignment tabs (2) on the front edge of the service cover with the notches on the
computer.
3. Slide the service cover toward the battery bay until the service cover snaps into place.
Using hard drives 55