Fax quality is poor, Fax cuts off or prints on two pages – HP Color LaserJet Pro MFP M177fw User Manual
Page 114
Fax quality is poor
Fax is blurry or light.
●
Increase fax resolution when sending faxes. Resolution does not affect received faxes.
1.
From the Home screen on the product control panel, touch the Setup button.
2.
Select
Fax Setup
, and then select
Advanced Setup
.
3.
Select
Fax Resolution
, and then select the correct setting.
NOTE:
Increasing resolution slows transmission speed.
●
Turn on the
Error Correction
setting from the control panel.
1.
From the Home screen on the product control panel, touch the Setup button.
2.
Select
Service
, and then select
Fax Service
.
3.
Select
Error Correction
, and then select
On
.
●
Check the toner cartridges and replace a cartridge if necessary.
●
Ask the sender to darken the contrast setting on the sending fax machine, and then resend the fax.
Fax cuts off or prints on two pages
●
Set the
Default Paper Size
setting. Faxes print on a single size of paper based on the
Default Paper Size
settings.
1.
From the Home screen on the product control panel, touch the Setup button.
2.
Select
System Setup
, and then select
Paper Setup
.
3.
Select
Paper Size
, and then select the correct setting.
●
Set the paper type and size for the tray used for faxes.
●
Turn on the
Fit to Page
setting to print longer length faxes on letter or A4 size paper.
1.
From the Home screen on the product control panel, touch the Setup button.
2.
Select
Fax Setup
, and then select
Advanced Setup
.
3.
Select
Fit to Page
, and then select
On
.
NOTE:
If the
Fit to Page
setting is off and the
Default Paper Size
setting is set to Letter, a Legal-size original
prints on two pages.
104 Chapter 8 Solve problems
ENWW