Check the error correction setting, Check the fit-to-page setting – HP Color LaserJet Pro MFP M177fw User Manual
Page 104
1.
From the Home screen on the product control panel, touch the Setup button.
2.
Select
Fax Setup
, and then select
Advanced Setup
.
3.
Select
Lighter/Darker
, and then adjust the setting for your fax job.
Check the Error Correction setting
Usually, the product monitors the signals on the telephone line while it is sending or receiving a fax. If the
product detects an error during the transmission and the error-correction setting is
On
, the product can
request that the portion of the fax be resent. The factory-set default for error correction is
On
.
You should turn off error correction only if you are having trouble sending or receiving a fax, and you are
willing to accept the errors in the transmission. Turning off the setting might be useful when you are trying to
send a fax overseas or receive one from overseas, or if you are using a satellite telephone connection.
1.
From the Home screen on the product control panel, touch the Setup button.
2.
Select
Service
, and then select
Fax Service
.
3.
Select
Error Correction
, and then select
On
.
Check the Fit-to-Page setting
If the product printed a fax job off the page, turn on the fit-to-page feature from the product control panel.
NOTE:
Make sure that the default paper size setting matches the size of the paper in the tray.
1.
From the Home screen on the product control panel, touch the Setup button.
2.
Select
Fax Setup
, and then select
Advanced Setup
.
3.
Select
Fit to Page
, and then select
On
.
Clean the pickup rollers and separation pad in the document feeder
If the document feeder experiences paper-handling problems, such as jams or multiple-page feeds, clean the
document-feeder rollers and separation pad.
1.
Lift the document-feeder input tray.
94
Chapter 8 Solve problems
ENWW