HP NonStop G-Series - Manual (Page 72)

Configuring the SMM Client on the NonStop System
Silo Media Manager Installation and User’s Guide — 541559-001
4 -8
Running the Client Processes
Running the Client Processes
Once the SMM client has been configured, the TCP/IP Process Name PARAM needs
to be set and the process executed before you use the GUI to connect to the robot.
To run the SMM client, exit the configuration menu by typing EXIT at the prompt. When
the TACL prompt appears, type the following as shown in
Figure 4-8 .
Figure 4-8. OBEY GO