HP NonStop G-Series - Manual (Page 136)

Silo Media Manager Quick Start Guide
Silo Media Manager Installation and User’s Guide — 541559-001
A- 6
E-mail Version of SMM Software (Client)
E-mail Version of SMM Software (Client)
If you have SMM CLIENT systems (NonStop systems with tape drives in the library, but
that the library control path is not physically attached to), you can unzip the client zip
file to another directory on your PC, and use the GUI to place those files on the client
systems. They configure the same way.
1. On the SMM CLIENT systems, do the following:
2. RUN CONFIG to create a new configuration file. You will have to give it a
password (this the password that will allow access to SMM).
3. Type in CONFIG_HOMETERM and enter a home terminal (normally $ZHOME on
the S-series NonStops)
4. Type in CONFIG_HOSTPORT# and choose the port number you configured on the
server. This is the port that the client will use to communicate with the server
through.
5. Type in CONFIG_CLNTPORT# and choose a port number that is at least 10 away
from the SERVER port number
6. OBEY your SMM CLIENT STARTUP FILE
Example A-3. Client STARTUP File
clear all
param tcpip^process^name $zb01a
run $system.tsismmc.tsismmc0/name $SMMC, nowait, pri
190, term $zhome, out $zhome, CPU 0/
Example A-4. Configured SMM CLIENT CONFIG Program
TSI-> view_config
DEVICE CONFIGURATION:
------------------------
CLIENT PORT#: 9876
HOST PORT#: 6001
HOST IP ADDRESS: 192.168.1.99
HOME TERM: $ZHOME