Media labeling tab, Figure 6-10 – HP NonStop G-Series User Manual

Page 100

Text mode
Original mode

SMM GUI Operations

Silo Media Manager Installation and User’s Guide — 541559-001

6- 12

Media Labeling Tab

Media Labeling Tab

The Media Labeling Tab allows you to label tape cartridges. See

Figure 6-10

Follow these steps to label a tape cartridge:

1. Select a tape drive to label. All media that is compatible with the selected drive will

be displayed.

2. Select ON or OFF for Override. Selecting Override as ON will override any existing

label that the tape may have.

3. Under Label Type, select ANSI, BACKUP, or TMF.

Figure 6-10. Media Labeling Tab

Note. SMM will only display drives that are connected to the same system as this
particular GUI session. You can open multiple GUI sessions connected to multiple
systems, if necessary.