HP XP P9500 Storage - Manual (Page 74)

1 These are initial copy parameters.
Pairsplit-S dialog box
Description Item
Port - GID – LUN (LDKC number: CU number: LDEV number) of the selected volume. The following
symbols might appear at the end of the LDEV number: Volume
• # (e.g., 00:00:3C #): Indicates the volume is an external volume. For details on external
volumes, see HP P9000 External Storage for Open and Mainframe Systems User Guide.
•
X (e.g., 00:00:3C X): Indicates the volume is a Thin Provisioning virtual volume. For details on
virtual volumes, see HP P9000 Provisioning for Open Systems User Guide.
Delete Pair by
Force •
Yes: The pair(s) will be released even if the storage system on the P-VOL side cannot
communicate with the storage system on the S-VOL side. This option may be used to free a host
waiting for a response from the storage system on the P-VOL side, thus allowing host operations
to continue.
•
No: The pair(s) will only be released if the storage system on the P-VOL side can change the
pair status of the P-VOL and S-VOL to SMPL.
When the status of the pair(s) to be released is SMPL, the default setting is Yes (cannot be changed).
Otherwise, the default setting is No.
74 ESAM GUI reference