HP 2310mfd 23 inch Diagonal LCD Monitor User Manual
Page 29
27
Press
9.
◄ ► to select Yes and press OK to
store the new channel.
Press
10.
MENU to exit.
Fine tune analogue channels
You can manually fine tune analogue channels when
reception is poor.
Press
1.
MENU.
Select
2.
Installation
► Channel install ►
Analogue: Manual.
The Analogue: Manual menu appears.
Press
3.
▲ ▼ ◄ ► to select and enter Fine-
tune.
Press
4.
▲ ▼ to adjust frequency.
Press
5.
OK when done.
Press
6.
▲ ▼ to select Store cur. chan. to
store channel number.
Press
7.
► to enter Store cur.chan..
Press
8.
◄ ► to select Yes and press OK to
store the current channel.
Press
9.
MENU to exit.
Skip channels
Press
1.
MENU.
Select
2.
Installation
► Channel install ►
Analogue: Manual.
The
Analogue: Manual menu appears.
Press
3.
▲ ▼ to select and enter Skip
channel.
Press
4.
◄ ► to select Yes and press OK to
skip the channel you are currently watching.
The selected channel is skipped when you
press CH
/ on your remote control or
view the channel list.
Press
5.
MENU
to exit.
NOTE
You can restore a skipped channel to your
•
channel listing (see ‘Step 2 Search and store
new TV channels’).
Manually install channels
This section describes how to search and store
analogue TV channels manually.
Press
1.
MENU.
Select
2.
Installation
► Channel install ►
Analogue: Manual.
The Analogue: Manual menu appears.
Press
3.
▲ ▼ to select the item you want to
adjust.
Colour system
•
Sound system
•
Search
•
Fine-tune
•
Store cur. chan.
•
Store new channel
•
Skip channel
•
Step 1 Select your system
NOTE
Skip this step if your system settings are
•
correct.
Press
1.
MENU.
Select
2.
Installation
► Channel install ►
Analogue: Manual.
The
Analogue: Manual menu appears.
Press
3.
▲ ▼ ◄ ► to select and enter
System.
Press
4.
▲ ▼ to select your country or
region.
Press
5.
OK to confirm.
Press
6.
MENU to exit.
Step 2 Search and store new TV channels
Press
1.
MENU.
Select
2.
Installation
► Channel install ►
Analogue: Manual.
The
Analogue: Manual menu appears.
Press
3.
▲ ▼ ◄ ► to select and enter
Search.
Press
4.
▲ ▼ or use Numeric buttons to
manually enter the three digit frequency.
Press
5.
OK to begin search.
Press
6.
◄ when the new channel is found.
Press
7.
▲ ▼ to select Store new channel
under a new channel number.
Press
8.
► to enter Store new channel.