HP 2310mfd 23 inch Diagonal LCD Monitor - Manual (Page 23)

21
CONNECTING A COMPUTER
An analogue RGB (15 pin) computer cable can be
connected.
ATV Connection
PC IN
RGB/PC AUDIO
TV back view
Mini D-sub
15 pin
Computer
RGB PC cable
Audio cable for
PC-to-TV
connection
Conversion adapter
(if necessary) (not provided)
DTV Connection
L R
RGB/PC
TV back view
Mini D-sub
15 pin
Conversion adapter
(if necessary) (not provided)
Computer
RGB PC cable
Audio cable for
PC-to-TV
connection
Connect a PC cable from the computer to the
RGB/PC terminal on the back of the MFM.
For acceptable PC signal formats
(
page 25).
However, these signal formats are converted to
match the number of pixels of the LCD panel.
Therefore, the MFM may not display small text
properly.
If you connect this unit to your PC, the
compressed image is displayed in S-XGA mode,
therefore the picture quality may deteriorate and
characters may not be read.
NOTE:
Some PC models cannot be connected to •
this MFM.
There is no need to use an adapter for
•
computers with DOS/ V compatible mini
D-sub 15 pin terminal.
CONNECTING A DVI DEVICE
One HDMI(type A connector)-to
DVI adapter cable (not provided with
MFM) and audio cables
ATV Connection
1
L R
TV back view
HDMI device
DTV Connection
HDMI1
HDMI2
L R
TV back view
HDMI device
HDMI (type A connector)-to-DVI adapter
cable (not provided with MFM)
For proper operation, the length of an HDMI-
to-DVI adapter cable should not exceed 3m. The
recommended length is 2m.
Standard analogue audio cables
An HDMI-to-DVI adapter cable (not provided
with MFM) transfers only video. Separate analogue
audio cables are required.
When connecting a DVI device, please connect to
the HDMI 1 port only.
NOTE:
HDMI, the HDMI logo, and High-Definition •
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing,
LLC.