HP 2310mfd 23 inch Diagonal LCD Monitor - Manual (Page 19)

17
The unauthorized recording of television •
programmes, DVDs, video tapes and other
materials may infringe upon the provisions of
copyright law.
The
• COMPONENT VIDEO INPUT
consists of three component video signals
(Y, P
b
, P
r
) and provides the best picture
performance. These terminals can only be
used with component video compatible
equipment such as a DVD video player.
Additional equipment and cables shown are
•
not supplied with this monitor.
TV OUTPUT
•
Supports only ATV/DTV signal to display out
or by VCR TV signal recording use.
Connecting an audio system
You can enjoy high quality dynamic sound by
connecting the monitor to an audio system.
CAUTION:
DO NOT connect the • DIGITAL AUDIO
output terminal to the AC-3 RF input of a
Dolby Digital Receiver with a built-in Dolby
Digital decoder.
Connect the
• DIGITAL AUDIO output
terminal to the Coaxial input of a Receiver
or Processor.
Refer to the owner’s manual of the
•
connected equipment as well.
When you connect the monitor to other
•
equipment, be sure to turn off the power
and unplug all of the equipment from the
wall outlet before making any connections.
The output sound of the monitor has a
•
wide dynamic range. Be sure to adjust the
audio amplifier’s volume to a moderate
listening level before turning on the power.
Otherwise, the speakers and your hearing
may be damaged by a sudden high volume
sound.
Turn off the amplifier before you connect or
•
disconnect the monitor’s power cord. If you
leave the amplifier power on, the speakers
may be damaged.
Warning:
When you are connecting (via the DIGITAL AUDIO
output terminal) an AV decoder that does not have
Dolby Digital or MPEG decoding function, be sure to set
PCM in SPDIF Type under SOUND menu. Otherwise,
the speakers and your hearing may be damaged by a
sudden high volume sound.
CONNECTING TO THE MFM
BACK CONNECTIONS
ATV Connection example
PC IN
RGB/PC AUDIO
SERV.C
HDMI 1
Y Pb Pr L R
Y Pb Pr L R COAXIAL
VIDEO L R
AV IN
VIDEO L R
AV OUT
TV
COMPONENT 1
COMPONENT 2
VCR(Recording)
Set Top Box
HDMI or DVI device
DVD video player
(with component video
outputs) or
TV back view
DTV Connection example
HDMI1
HDMI2
RGB/PC
VIDEO
L R
COMPONENT
VIDEO Y Pb Pr
VIDEO L R
L R (COAXIAL) (OPTICAL)
SERV.C
AV IN
AV OUT
TV
VCR(Recording)
Set Top Box
HDMI or DVI device
DVD video player
(with component video
outputs) or
TV back view
Before connecting any external equipment, •
turn off all main power switches. If there is
no switch, remove the main power plug from
the wall socket.