HP 2310mfd 23 inch Diagonal LCD Monitor - Manual (Page 24)

22
USING THE OSD MENUS
FOR ATV MODEL
Press the 1. MENU/EXIT button to display
or close the main menu.
Use the
2. Navigation Ring to move around
to select, adjust or confirm an item in the
OSD (On Screen Display) menu.
Press the MENU/EXIT button to enter the main
OSD. Adjust the items including Picture, Sound,
Features, and Installation. However, some
function items in the menus may only be enabled
in the particular source modes.
PICTURE MENU •
Use Smart Picture
Press 1. VIDEO.
The Smart picture menu appears.
Press 2. ▲ ▼ to select one of the following
smart picture settings.
Personal •
Vivid •
Standard •
Movie •
Game •
Eco •
Press
3. OK to confirm the choice.
The selected smart picture setting is applied.
Adjust Picture Setting
Smart Picture
Backlight
Contrast
Colour
Brightness
Hue
Sharpness
Vivid
100
50
48
60
0
8
Move Select
Sound
Features
Installation
Picture
Press 1. MENU.
Press 2. OK to select Picture.
The Picture menu appears.
A bar may appear in the upper, lower, right •
or left side of the screen, or parts of the
picture may be obscured depending on some
signals. This is not the malfunction.
If the edges of the picture are stretched,
•
readjust the picture position adjustments in
the PC of PICTURE menu.
Depending on the specification of the PC
•
you are playing the DVD-Video on, and the
DVD’s title, some scenes may be skipped, or
you may not be able to pause during multi-
angle scenes.
SELECTING THE INPUT SOURCE
First press • SOURCE on the remote control
to display the video input source list, then
press
▲ or ▼ and OK in order to select
the PC input mode ( page 25).
This function may not be available for some •
signal or if no signal is received.
The optimum points of the clock phase
•
and sampling clock adjustments may be
incomprehensible according to the input
signals.
Adjusting the picture settings
Press 1. MENU/EXIT and use ◄ or ► to
select PICTURE.
Use
2. ▲ and ▼ to select PC and press ► or
OK.
Use
3. ▲ or ▼ to select an option and press
◄ or ► to adjust the setting as required.
Using the Auto Adjust
Adjust Horizontal Position, Vertical Position,
Horizontal Clock, and Clock Phase automatically.
Depending on the type of signal, there is a
possibility that the display may not be adjusted in
its optimum condition with this function. In that
case, please adjust each item manually.
Press 1. MENU/EXIT and use ▲ and ▼to
select Features.
Use
2. ► and ▼to select Auto Adjust and
press ► or OK.
Use 3. ► or OK to highlight Yes and press
OK.