HP 2310mfd 23 inch Diagonal LCD Monitor - Manual (Page 26)

24
FEATURES MENU •
Set the TV clock
You can display a clock on the TV screen.
Press 1. MENU.
Select 2. Features ► Clock.
The Clock menu appears.
Press 3. ▲ ▼ ◄ ► or Numeric buttons to
enter time.
Press
4. Done to confirm.
Press 5. MENU to exit.
User timers
You can set timers to switch the TV on or switch
to standby at a specified time.
Picture
Sleeptimer
Clock
On timer
Set code
TV lock
01 : 20
0
Activate
Unlock
Move Select
Sound
Features
Installation
Automatically switch the TV to standby
(Sleeptimer)
Sleeptimer switches the TV to standby after a
defined period of time.
Press 1. MENU.
Select 2. Feature ► Sleeptimer.
The Sleeptimer menu appears.
Press 3. ◄ ►to set the sleep time.
The Sleeptimer can be up to 180 minutes in
steps of five minutes. If set to zero minutes,
the Sleeptimer is switched off.
Press
4. OK to activate the Sleeptimer.
The TV switches to standby after the pre-
defined period of time.
NOTE
You can always switch off your TV earlier or •
reset Sleeptimer during the countdown.
When you press any button on the remote
•
control with less than one minute left in the
countdown, Sleeptimer will be automatically
canceled.
Press 3. ▲ ▼ ◄ ► to select one of the
following sound settings.
• Smart sound:
Accesses pre-defined
smart sound settings.
• Bass: Adjusts the bass value to fit your
best.
• Treble: Adjusts the treble value to fit
your best listening.
• Volume: Adjusts the volume.
• Balance: Sets the balance of the left and
right speakers to best fit your listening.
• Dual I-II: Selects between audio
languages if dual sound is broadcast.
• Mono/Stereo: Selects between mono or
stereo if stereo is broadcast.
• Surround: Enables spatial sound.
• Auto volume: Automatically reduces
sudden volume changes, for example,
when switching channels. When enabled,
this produces a more consistent audio
volume.
• Delta volume: Levels out volume
differences between channels or
connected devices. Switch to the
connected device before you change the
delta volume.