HP Color LaserJet 4650 Printer series - Manual (Page 71)

To set color supply out response
1. Press M
ENU
to enter the MENUS.
2. Press to highlight CONFIGURE DEVICE.
3. Press to select CONFIGURE DEVICE.
4. Press to highlight SYSTEM SETUP.
5. Press to select SYSTEM SETUP.
6. Press to highlight COLOR SUPPLY OUT.
7. Press to select COLOR SUPPLY OUT.
8. Press or to select the appropriate setting.
9. Press to set the selection.
10. Press M
ENU
.
Jam recovery
This option allows you to configure the printer response to paper jams, including how it
handles the pages involved. AUTO is the default value.
● AUTO — the printer automatically turns jam recovery on when sufficient memory is
available.
● ON— the printer reprints any page involved in a paper jam. Additional memory is
allocated to store the last few pages printed, and this may cause overall printer
performance to suffer.
● OFF — the printer will not reprint any page that was involved in a paper jam. Since no
memory is used to store the most recent pages, performance may be optimal.
To set jam recovery response
1. Press M
ENU
to enter the MENUS.
2. Press to highlight CONFIGURE DEVICE.
3. Press to select CONFIGURE DEVICE.
4. Press to highlight SYSTEM SETUP.
5. Press to select SYSTEM SETUP.
6. Press to highlight JAM RECOVERY.
7. Press to select JAM RECOVERY.
8. Press or to select the appropriate setting.
9. Press to set the selection.
10. Press M
ENU
.
ENWW Changing printer control panel configuration settings 57