HP Optical Jukeboxes - Manual (Page 44)

3-10 Chapter 3
Operating the Jukebox
Loading a Disk into the Jukebox
Loading a Disk into the Jukebox
NOTE Label all disks before loading them into the jukebox. (See “Labeling an Optical Disk
Cartridge” in Chapter 2 for instructions.)
Some software packages require that you load and eject disks by using instructions
in the software. If you use a software package to manage files in the jukebox, check
the software documentation before proceeding with these steps.
Start with READY or LOAD in the display.
Figure 3-3 Loading a Disk
1. Insert a disk into the mailslot with Side A of the disk facing up. The shutter end
of the disk goes in the mailslot first.
When the disk is inserted, it is automatically pulled into the mailslot. An
incorrectly inserted disk is rejected, CART IN WRONG displays briefly, and
then LOAD SLOT # displays. (“#” is flashing and is the number of the first
available storage slot in the jukebox.)
2. If you want to select the storage slot number that shows in the display, press
LOAD or ENTER . If you want to choose a different storage slot, press NEXT or
PREV until the desired slot number displays, and then press ENTER .