HP Optical Jukeboxes - Manual (Page 14)

1-2 Chapter 1
Setting Up the Jukebox
Overview of This Chapter
Overview of This Chapter
This chapter gives information on the following topics:
• what you need to set up the jukebox
• choosing a proper environment for the jukebox
• identifying features on the jukebox side panels
• connecting the jukebox to your computer
• connecting power
• moving and shipping the jukebox
What you need to set up the jukebox:
• power cord (included)
• single-ended and differential SCSI terminators (included)
• SCSI cable with either a 50-pin high-density or a 68-pin high-density connector
depending on whether you choose the single-ended or differential interface
• single-ended or differential SCSI host adapter with at least one available address
• application software that supports this type of jukebox
• this guide (included)
Choosing a Location
Before setting up your jukebox, choose the proper environment based on the
following recommendations:
• temperature range between 65-75º F (18-24º C).
• away from sources of particulate contamination such as printers, scanners,
frequently-used doors and walkways, supplies that collect dust, and smoke-filled
rooms.
• enough room to comfortably insert disks in the mailslot, 2-3 inches on all other
sides to allow air circulation (see Figure 1-1).
• availability of AC power with voltage ranges of 100-127 V or 200-240 V
(nominal).