HP Optical Jukeboxes - Manual (Page 42)

3-8 Chapter 3
Operating the Jukebox
Understanding Display Window Messages
Understanding Display Window Messages
The display window shows the operations you may select. Instructions for selecting
or changing choices follows the explanation of the messages.
Top Level Menus
READY The jukebox is ready for operation.
ADMIN * Select to access second-level choices. You must enter a security
code to access these choices.
NOTE A * indicates that there are multiple selections available for that choice currently
displayed. When a choice is flashing, press
ENTER to select it or PREV or NEXT to
display other choices.
Second Level Menus
You must enter a security code before accessing these functions. See “Entering the
Administration Menu Password” later in this chapter. A default password of 000
000 000
is set at the factory. You may want to change this default code to a private
code to prevent unauthorized access to the jukebox. See “Changing the
Administration Menu Password” in this chapter.
TEST * Select to run internal tests (normally, these are run by service).
INFO * Select to retrieve performance information stored in the
jukebox logs.
CONFIG * Select to customize the way the jukebox functions.
SCSI IDs * Select to view and/or change the SCSI IDs and logical unit
numbers (LUNs).
ONLINE
REPAIR * Select to view and change drive settings for online drive
replacement (used by service only)
NOTE An “*” indicates there are multiple selections available for the displayed choice.
When a menu selection is flashing, press ENTER to choose that selection, or press
PREV or NEXT to display other choices that available in that part of the menu.