HP BD-2000 Blu-ray Disc Player - Manual (Page 56)

56
Additional Information
To upgrade firmware using a
data disc
1 From your computer, connect to the
Internet and visit the manufacturer’s
website.
2 Download the firmware upgrade file to
your computer.
3 Use commercial CD/DVD recording
software, such as Nero™, to convert the
*.iso file to a disc image.
4 Burn the converted file onto a disc.
5 Remove any inserted disc or USB drive
from the Blu-ray player. And turn off the
Blu-ray player.
6 Turn the Blu-ray player back on.
7
Insert the upgrade disc. The upgrade
screen may take some time to appear.
8 Follow the on-screen instructions to
start the upgrade. If the disc does not
automatically update, press HOME on
the remote control. Use to select
General Setting > System > Upgrade
> Disc, then press OK. The firmware
upgrade will begin.
9 Once completed, a message will appear
on the screen.
WARNING
»
DO NOT TURN OFF THE POWER while
upgrading is in progress!