HP BD-2000 Blu-ray Disc Player - Manual (Page 35)

35
Using Media Center
Playing Files from a
Data Disc
1 If turned off, press to turn on the Blu-
ray player.
2 Press to open the disc tray.
3 Insert the data disc into the disc tray.
4 Press to close the disc tray.
3 The Blu-ray player determines whether
files on the data disc contain music,
videos, or photos.
If the data disc contains supported files,
the Media Browser screen is displayed
on screen. See ‘Media Center Menu’
(p.36) for details.
Setting Up a USB
Drive For Playback
USB Drive Requirements
»
USB drive must be formatted as “FAT32”. •
Insert a USB drive into a computer and copy
the desired files onto the USB drive.
Note:
Use only a USB drive, sometimes called a •
thumb drive .
Never use an MP3 player or an external hard •
disk drive.
Playing Files From a
USB Drive
1 Make sure the Blu-ray is turned on.
2 Insert a USB drive into the USB port of
your Blu-ray player.
3 Press Media Center to display the Media
Center menu. See ‘‘Media Center Menu’
(p.36) for details.
Note:
Only the files with the following extensions are
supported by the Blu-ray player:
Video files: • *.WMV, *.AVI, *.MP4, *.M4V,
*.MKV
Music files:
• *.WMA, *.AAC
Picture files: • *.JPG, *.JPEG, *.PNG, *.GIF