HP LaserJet Enterprise 700 color MFP M775 series - Manual (Page 60)

Load the 500-sheet trays
1. Open the tray.
NOTE: Do not open the tray while it is in
use.
2. Adjust the paper-length and paper-width
guides by squeezing the adjustment latches
and sliding the guides to the size of the paper
being used.
3. Load paper into the tray. Check the paper to
verify the guides lightly touch the stack, but do
not bend it.
NOTE: To prevent jams, do not overfill the
tray. Be sure that the top of the stack is below
the tray full indicator.
46 Chapter 3 Input trays and output bins ENWW