HP Officejet Pro K550 Printer - Manual (Page 19)

Installing tray 2
Tray 2 can hold up to 350 sheets of plain paper. It comes with the HP Officejet Pro K550dtn and HP
Officejet Pro K550dtwn printers, and is an optional accessory for the HP Officejet Pro K550 printer.
See
Accessories for ordering information.
To install tray 2
1. Unpack the tray, remove the packing tapes and materials, and move the tray to the prepared
location. The surface must be sturdy, level, and located in a well-ventilated area. Allow space
around the printer, including 50 mm (2 inches) for ventilation.
2. Turn off the printer, and disconnect the power cord.
3. Set the printer on top of the tray.
CAUTION Be careful to keep your fingers and hands clear of the bottom of the printer.
4. Connect the power cord and turn on the printer.
ENWW Installing tray 2 11