HP Scanjet Enterprise Flow 5000 s2 Sheet-feed Scanner - Manual (Page 41)

1
2
3
a. Slide your fingertip behind the roller pin (1) and pull forward to release the pin from its housing
(2).
b. Slide the roller forward to free it from the pin (3) and set the roller aside.
9. Replace the front roller with the comparable roller from the roller replacement kit.
3
1
2
4
a. Slide the replacement roller onto its pin (1), rotate the roller as necessary to align the slots on the
roller assembly with the pegs on the pin (2), and then slide the roller to the left until it clicks into
place.
b. Press the roller pin backward until it touches the pin clip (3), and then press firmly until the pin
clicks into place (4).
10. Close the roller cover on the front of the hatch, pressing firmly until you hear a click.
11. Close the document feeder hatch, and then reconnect the USB cable and power supply to the scanner.
12. Press the Power ( ) button to turn on the scanner, and then update the scanner maintenance history:
ENWW Replace the rollers 35