HP Scanjet Enterprise Flow 5000 s2 Sheet-feed Scanner - Manual (Page 17)

Load documents
1. Extend the document input and output trays.
a. Locate the recessed input tray extension at the top of the input tray, and then press down at the
arrow and release to extend the input tray extension.
b. Slide out the output tray, and then fold out the output tray extension and paper guides.
2. Adjust the paper guides on the document input tray to the width of the documents. Take care not to
overtighten the guides, which can restrict paper feeding.
When scanning small originals such as checks, it is especially important that the paper guides fit snugly
against the edges of the original yet not restrict paper feeding.
ENWW Load originals 11