HP Scanjet Enterprise Flow 5000 s2 Sheet-feed Scanner - Manual (Page 18)

3. Fan the stack of document pages to ensure that the pages do not stick together. Fan the edge that will
be pointing into the feeder in one direction, and then fan that same edge in the opposite direction.
4. Align the edges of the documents by resting the side of the stack against a flat surface (such as a table
top), then gently tapping the upper edge until the pages are aligned. Never tap the stack against the
table top. Rotate the stack 90 degrees so that the top edge of the document is resting on the table top
and repeat.
5. Gently set the stack in the document input tray. Load the pages face down with the top of the pages
pointing into the document feeder.
For best results, grip the stack on the left and right edges as shown, do not drop the stack into the
document input tray, and do not tap the top edge of the stack after you have placed it in the document
input tray.
If the stack has mixed-width pages, make sure the pages are center-justified as shown.
12 Chapter 2 Use the scanner ENWW