HP StoreEasy 1000 Storage - Manual (Page 11)

2 Configuring Automated Storage Manager
Installing the Automated Storage Manager Agent
If you plan to perform data migration tasks for any application servers on your network using the
wizards that are available in the Automated Storage Manager, you must first install the Automated
Storage Manager Agent on those application servers. Follow these instructions before performing
any data migration operations.
Installing the Automated Storage Manager Agent on network application servers
To install the Automated Storage Manager Agent on a network application server:
1. Locate the file at c:\\hpnas\components\allinonestoragemanager\agent.
2. Copy the file to the application server(s) you will use to perform data migration tasks.
3. Run the copied file on each application server to install the Automated Storage Manager Agent.
or
1. On the application server that stores data to be migrated, insert the HP StorageWorks Storage
System Recovery DVD.
NOTE:
If the application server is in a remote location, use Remote Desktop Connection to access the
server, copy the Agent installation files, and run the Agent installation.
2. Navigate to the \Automated Storage Manager\Agent folder on the DVD.
3. Double-click asmagentinstaller.exe.
4. Follow the on-screen installation instructions.
After completing the Automated Storage Manger Agent installation on the application servers, you
can then schedule data migration using the HP Automated Storage Manager wizards.
Add an HP Storage System
You may add another HP Storage System for the ease of managing more than one server from the
same console. To add another HP Storage System:
1. Click on Add HP Storage System in the Actions pane.
2. A dialog box will open. Enter the hostname or IP address (IPv4) of the HP Storage System to add.
3. The added HP Storage System will appear in the Navigation pane.
HP StorageWorks Automated Storage Manager User Guide 11