HP 3PAR Application Software Suite for Microsoft Hyper-V - Manual (Page 58)

Table 24 Set-RmhPolicy parameters (continued)
Description Optional/Required Parameter
Integer value followed by letter h or d
for Hours and Days respectively. Use 0
to reset. Optional -Expiry
Integer value followed by letter h or d
for Hours and Days respectively. Use 0
to reset Optional -Retention
Disabled or enabled. Use reset to
reset. Optional -SavedStateBackups
Displays progress messages Optional -Verbose
Get-ClusterNodeNames
The Get-ClusterNodeNames command retrieves cluster node names for the Hyper-V cluster.
Preconditions
The user must first login with Login-Rmh.
Syntax
Any optional parameters are enclosed in square brackets [ ] around them.
Get-ClusterNodeNames -RmhServerName -HypervName
[-Verbose]
Table 25 Get-ClusterNodeNames parameters
Description Optional/Required Parameter
Host name of the RMH Server. This is
FQDN or IP address. Required -RmhServerName
Select Hyper-V host/cluster to use. This
is FQDN or IP address. Synonyms for Required -HypervName
Hyper-V are supported. The
localhost
is not supported.
Displays progress messages. Optional -Verbose
Get-EncryptedLoginPassword
Get-EncryptedLoginPassword is used for scripting to return an encrypted password for the
currently logged-in RMH user.
Preconditions
The user must first login with Login-Rmh.
Syntax
Any optional parameters are enclosed in square brackets [ ] around them.
Get-EncryptedLoginPassword-RmhServerName [-Verbose]
58 Using PowerShell Snap-in Command Line Interface