HP Insight Diagnostics Software - Manual (Page 21)

3. Select the test duration:
•
Loops runs the test for the specified number of test cycles.
•
Total Test Time (minutes) runs the test for the specified length of time.
4. Select Stop on First Error to stop all tests if an error occurs.
5. Select the device to test:
•
Select the All Devices check box to test all devices.
•
Select the check box for one or more devices to test specific devices.
6. Click Begin Testing.
Figure 9 Test tab – Quick Test
The Status tab displays test progress. The logs, on the Log tab, display detailed test results.
Running a Complete Test
1. Click Complete Test.
2. Select the test mode:
•
Interactive runs all tests, some of which require user input.
•
Unattended runs the tests that do not require user input.
3. Select the test duration:
•
Loops runs the test for the specified number of test cycles.
•
Total Test Time (minutes) runs the test for the specified length of time.
4. Click Stop on First Error to stop all tests if an error occurs.
5. Select the device to test:
•
Select All Devices to test all devices.
•
Select the check box for one or more devices to test specific devices.
6. Click Begin Testing.
Using the Test tab (HP Insight Diagnostics Offline Edition only) 21