Printer curled the media, Print job is extremely slow – HP LaserJet 1022n Printer User Manual

Page 77

Printer curled the media

●

See

Curl or wave

for more information.

●

See

Media paths

Choosing paper and other media

for more information.

Print job is extremely slow

The maximum speed of the printer is up to 18 ppm for A4 media and 19 ppm for letter media
for the HP LaserJet 1022, 1022n, 1022nw printers. Your print job might be very complex. Try
the following:

●

Reduce the complexity of your document (for example, reduce the number of multiple
graphics).

●

Access the printer properties in the printer driver. See

Printer properties (driver)

for

instructions. Set the media type to plain paper.

NOTE

This may cause toner to fuse improperly if you are using heavy media.

●

Narrow media or heavy media will slow printing. Use normal media.

●

Print speed is based on computer processor speed, the amount of memory, and the
amount of hard disk space available on your computer. Try increasing these components.

Return to

Finding the solution

ENWW

Paper handling problems