HP LaserJet 1022n Printer - Manual (Page 65)

Changing the printer separation pad
Normal use with good media causes wear. The use of poor media might require more
frequent replacement of the separation pad. If the printer regularly pulls multiple sheets of
media at a time, you might need to change the separation pad. See
Ordering supplies to
order a new printer separation pad.
NOTE Before you change the separation pad, clean the pickup roller. See Cleaning the pickup roller .
1. Turn the printer off, and then unplug the power cord from the printer. Wait for the printer
to cool.
2. At the back of the printer, unscrew the two screws holding the separation pad in place.
3. Remove the separation pad.
ENWW Changing the printer separation pad 57