HP Scripting Tools for Windows PowerShell - Manual (Page 8)

Table 1 HP OA Cmdlets for Windows PowerShell (continued)
Description Cmdlet
All servers in the enclosure should be powered off before clearing the
VCMODE. Clear-HPOAVCMode
Connects to an OA and creates an SSH session. Connect-HPOA
Closes an SSH session with the OA. Disconnect-HPOA
Find list of OA in a specified subnet. Find-HPOA
Shows the specified direct attached blade device serial number. Get-HPOABladeDeviceSerialNumber
Displays a list of installed CA certificates. Get-HPOACACertificate
Shows the certificate information for the OA. Get-HPOACertificate
Displays the script required to recreate the settings of the enclosure. Get-HPOAConfig
Displays the current date, time, and time zone of the internal clock of the
enclosure. Get-HPOADate
Displays EBIPA information. Get-HPOAEBIPA
Displays information for current status of the specified enclosure fan. Get-HPOAEnclosureFan
Displays enclosure information. Get-HPOAEnclosureInfo
Displays information about the Insight Display screen. Get-HPOAEnclosureLCD
Displays the current Enclosure Dynamic Power Cap in watts. Get-HPOAEnclosurePowerCap
Displays the bays in the enclosure that are exempt from the Enclosure
Dynamic Power Cap. Get-HPOAEnclosurePowerCapBaysToExclude
Displays a detailed summary of the enclosure's present power state. Get-HPOAEnclosurePowerSummary
Displays power supply details of the enclosure. Get-HPOAEnclosurePowerSupply
Displays the basic health and status of the enclosure subsystem. Get-HPOAEnclosureStatus
Displays the highest ambient temperature being reported by the installed
blade devices. Get-HPOAEnclosureTemp
The FRU Summary section provides information on all field replaceable units
within the enclosure. Get-HPOAFRU
Displays the firmware log for the selected server or range of servers. Get-HPOAFWLogServer
Displays the firmware log session for the selected server or range of servers. Get-HPOAFWLogSession
Displays enclosure firmware management configuration settings. Get-HPOAFWManagement
Displays the enclosure firmware management log. Get-HPOAFWManagementLog
Displays a summary of enclosure firmware components. Get-HPOAFWSummary
Displays current health of all components in the enclosure. Get-HPOAHealth
Displays the current HP SIM SSO configuration for the OA. Get-HPOAHPSIMInfo
Displays information about the OA. Get-HPOAInfo
Displays interconnect settings and information. Get-HPOAInterconnectInfo
Displays the interconnect list. Get-HPOAInterconnectList
Displays the port mapping or the specified interconnects or range of
interconnects. Get-HPOAInterconnectPortMap
Displays the PowerDelay status for the specified interconnects or range of
interconnects. Get-HPOAInterconnectPowerDelay
8 HP Scripting Tools for Windows PowerShell cmdlets