HP Scripting Tools for Windows PowerShell - Manual (Page 10)

Table 1 HP OA Cmdlets for Windows PowerShell (continued)
Description Cmdlet
Displays enclosure devices that are available for firmware upgrade. Get-HPOAUpgradableDevice
Displays uptime for the OA. Get-HPOAUpTime
Displays which USB controller is currently enabled. Get-HPOAUSB
Displays a list of firmware images, configuration scripts, ISO images and
other binary files present on the enclosure USB media. Get-HPOAUSBKey
Displays all the user list or the specified user's details. Get-HPOAUser
Displays Virtual Connect Mode settings. Get-HPOAVCMode
Shows VLAN settings. Get-HPOAVLAN
Removes the specified trust certificate (CA, HPSIM, LDAP). Remove-HPOACertificate
Removes the IP address of a DNS server from the list for the specified OA. Remove-HPOADNS
Removes the DNS server specified by the IP address from the list of DNS
servers for either SERVER bays or INTERCONNECT bays. Remove-HPOAEBIPA
Removes the IPv6 static address for the OA. Remove-HPOAIPv6Address
Removes the user specified language. Remove-HPOALanguage
Disables access to the bays for the specified LDAP group. Remove-HPOALDAPBay
Removes LDAP group from the system. Remove-HPOALDAPGroup
Disables access to the OA for the specified LDAP group. Remove-HPOALDAPPrivilege
Removes an IP address from the list of systems that receive SNMP traps. Remove-HPOASNMPTrapReceiver
Removes the specified SNMP user. Remove-HPOASNMPUser
Removes an IPv4 or IPv6 address from the list of addresses being handled
by the IP Security feature. Remove-HPOATrustedHost
Removes a user from the system. Remove-HPOAUser
Removes user access from a bay. Remove-HPOAUserBay
Removes the certificate associated with a user. Remove-HPOAUserCertificate
Removes the OA from the control of the user to whom the OA is currently
assigned. Remove-HPOAUserPrivilege
Restarts OA, server, interconnect specified by bay number. Reset-HPOA
Saves EBIPA settings to flash drive. Save-HPOAEBIPA
Enables or disables logging of inventory and health status for shared
infrastructure items such as fans and power supplies to the blades that
depend upon them. Set-HPOAActiveHealthSystem
Enables or disables the sending of alert emails when an event occurs and
also edits the Alertmail settings. Set-HPOAAlertmail
Sets the serial number of the specified Storage, Tape, or I/O expansion
blade. Set-HPOABladeDeviceSerialNumber
Sets the date of the enclosure. Set-HPOADate
Enables or disables DHCP domain name and sets the domain name for the
OA. Set-HPOADHCPDomainName
Enables or disables DHCPv6 mode for management interfaces of all devices
in the enclosure. Set-HPOADHCPv6
10 HP Scripting Tools for Windows PowerShell cmdlets