HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 15)

Troubleshooting 15
Error message Resolution
Unable to get enclosure VC mode information Log into VC Manager GUI and resolve any errors with VC
Manager. Reset the OA to factory defaults, and then log
into the VC Manager GUI.
Initialization process failed. Firmware update
cannot continue. Check update requirements, and then try the update
again.
File extraction failed Verify that the Virtual Connect firmware package is
correct, or download it again from the HP website.
Firmware update failed on module See the fwupdate####.log file.
Unable to transfer file to module Verify connectivity between the client and the enclosure.
Unable to configure module for update Verify connectivity between the client and the enclosure.
Another firmware update is currently in progress Wait until the current update is complete before
attempting to update the firmware.
The specified activation ordering method is not
valid Verify that the activation order method (-oe or -of) is
correct.
Before contacting HP technical support, be sure to have the Virtual Connect Support Utility log file
(fwupdate####.log) available.