HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 13)

Commands 13
Update a single module in an enclosure managed by Virtual Connect:
vcutil -a update -i 192.168.1.100 -u Administrator -p password -vcu John
-vcp vcPass -l C:\images\vcfw-120.bin
Perform an update and specify an activation ordering method:
vcutil -a update -i 192.168.1.100 -u Administrator -p password -vcu John
-vcp vcPass -l C:\images\vcfw-120.bin -oe serial -of parallel
Perform an update using a firmware image from a web server URL:
vcutil –a update –i 192.168.1.100 –u Administrator –p password –l
http://www.myserver.com/vcfw-120.bin
Perform an update using a firmware image from an FTP server on the network:
vcutil –a update –i 192.168.1.100 –u Administrator –p password –l
ftp://user:[email protected]/vcfw-120.bin
Perform an update of the same firmware version on a degraded module:
Vcutil -a update -i 192.168.1.100 -u Administrator -p password -l
C:\images\vcfc-120.bin -f version,health
version
Display the current running firmware version on all modules in a specific target enclosure.
Item Description
Syntax
vcutil -a version -i -u -p [-b ]
Parameters:
IP IP address of the active OA in the enclosure*
USER Name of the OA user with privileges to access all enclosure interconnect bays
PWD Password of the OA user
BAY
Optional. The bay number of the target module. If not specified, the default is all supported
modules.
*In a multi-enclosure environment, this must be the IP address of the active OA in the primary enclosure.
Examples
Display all modules and their current firmware versions:
vcutil -a version -i 192.168.1.100 -u Administrator -p password
Display a single module and its current firmware version:
vcutil -a version -i 192.168.1.100 -u Administrator -p password -b 1