HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 11)

Commands 11
supportdump
Log into VC Manager using the supplied credentials and access Virtual Connect to request a support
information (debug dump) download. VCSU saves that file in the current directory as the file name
supplied by Virtual Connect. A functioning VC Manager domain is required for this action.
Item Description
Syntax vcutil -a supportdump -i -u -p -vcu -
vcp
Parameters:
IP IP address of the active OA in the enclosure*
USER
Name of the OA user with privileges to access all enclosure interconnect bays
PWD
Password of the OA user
VCM USER Name of Virtual Connect user with Domain privileges. Required if an enclosure is in a Virtual
Connect domain.
VCM PASS Password for the Virtual Connect user
*In a multi-enclosure environment, this must be the IP address of the active OA in the primary enclosure.
Example
Save support information:
vcutil -a supportdump -i 192.168.0.100 -u Administrator -p password -vcu
Administrator -vcp password
update
Update the firmware.
The user must provide the primary OA IP address, user credentials, and the package file to use for the
update. The user can also provide an optional bay number.
The user can also force an update of modules in the following circumstances:
• The target module contains a running firmware image that is the same version as the one in the
source package.
• The target module contains a running firmware image that is newer than the version in the source
package.
Item Description
Syntax vcutil -a update -i -u -p -l [-b ]
[-f ] -vcu -vcp [-q] [-oe ] [-
of ] [-we ] [-wf ]
Parameters:
IP
IP address of the active OA in the enclosure*
USER
Name of the OA user with privileges to access all enclosure interconnect bays
PWD Password of the OA user
FILE Full path to the Virtual Connect package on the local computer or supported remote server